CS106 Pulse Generator
CS106 Pulse Generator
Description
This generator is designed for the test of the transients conducted susceptibility of power leads according to MIL-STD-461F / CS106. These requirements are applicable to submarine and surface ship equipment and subsystem AC and DC input power leads. This pulse generator must be ordered with the active inductive coupler IC10M. Other accessories are available as an option in order to build the full test set-up, basically consisting of a calibration load, an oscilloscope, etc. The generator can be fully controlled by a computer through a RS232 or an USB interface.
Features
This generator is also available as a module which has to be installed inside the POG-CS116 modular generator.
Specification
| Reference | PG-CS106 | M-CS106 |
| Type | standalone generator | module |
| Standard | MIL-STD-461F / CS106 | |
| Peak voltage (on 5 Ω load) | 25 V to 500 V | |
| Peak current (on 5 Ω load) | 5 A to >80 A | |
| Repetition rate | 1 – 15 pulses per second | |
| Rise time (0 – 100 %) | 1.5 µs ± 0.5 µs (on 5 Ω) | |
| Fall time (100 – 0 %) | 3.5 µs ± 0.5 µs (on 5 Ω) | |
| Pulse duration (0 – 0 %) | 5 µs ± 22 % (on 5 Ω) | |
| Output impedance | ≤ 2 Ω | |
| Output connector | Hummel M23 | |
| Remote control | RS232 and USB | |
| Power supply | 90 – 132 Vac or 170 - 264 Vac 50 - 60 Hz / 150 VA | internal |
| Dimensions (W x H x L) | 45 x 19 x 56 cm | 23.5 x 6.5 x 24 cm |
| Weight | 13 kg | 1.2 kg |
Follow Us | Company |
|