CS115 Rectangular Pulse Generator
CS115 Rectangular Pulse Generator
This test generator is designed to comply with the requirements of the MIL-STD-461 CS115. The test method CS115 is used to verify the ability of the EUT to withstand pulse excitation on interconnecting cables. The pulse generator can be ordered with all the accessories in order to build the full test set-up basically consisting of an injection probe, an attenuator and an oscilloscope. The generator can be controlled by a computer through a RS232 or USB interface.
Features
This generator is also available as a module which has to be installed inside the POG-CS116 modular generator.
Specification
| Reference | PG-CS115 | M-CS115 |
| Type | standalone generator | module |
| Standards | MIL-STD-461 D/E/F/G CS115 | |
| Maximum output voltage | about 1 kV (on 50 Ω) | |
| Repetition rate | single, 1 to 50 Hz | |
| Rise time (10 - 90 %) | ≤ 2 ns | |
| Fall time (90 - 10 %) | ≤ 2 ns | |
| Pulse duration (90 - 90 %) | ≥ 30 ns | |
| Pulse amplitude variation | ± 5 % | |
| Output impedance | 50 Ω | |
| Output connector | N (female) | |
| Remote control | RS232 and USB | |
| Power supply | 90 - 264 Vac 47 - 63 Hz / 150 VA | internal |
| Dimensions (W x H x L) | 45 x 18 x 55 cm | 23.5 x 6.5 x 24 cm |
| Weight | 13.5 kg | 1.2 kg |
Previous：
CS106 Pulse Generator
Follow Us | Company |
|
咨询电话
010-8840 8841
Copyright©2020 Aero-Rad Technology Co.,Ltd. All rights reserved