CS116 Damped Sinusoidal Generator
CS116 Damped Sinusoidal Generator
Description
This test generator is designed to comply with the requirements of the MIL-STD 461 CS116. The test method CS116 is used to verify the ability of the EUT to withstand sinusoidal excitation on interconnecting cables. The pulse generator can be ordered with all the accessories in order to build the full test set-up, consisting basically of an injection probe, an attenuator and an oscilloscope. In addition to the basic requirements of the standard CS116, the number of discrete frequencies is increased to 9 or 17 instead of 6. This allows a better excitation of the resonances of the equipment under test. This generator has only one output and does not require any change of connection during the test. That feature greatly reduces the test duration. The generator can be fully controlled by a computer through a RS232 or USB interface.
Features
Multiple frequency bands can be selected freely, covering a wide range of frequency bands, and can be selected flexibly according to the needs.
Specification
| Type | POG-CS116-6 | POG-CS116-9 | POG-CS116-17 |
| Frequencies | 10, 100 kHz 1, 10, 30, 100 MHz | 10, 30, 100, 300 kHz 1, 3, 10, 30, 100 MHz | 10, 18, 30, 56, 100, 180, 300, 560 kHz 1, 1.8, 3, 5.6, 10, 18, 30, 56, 100 MHz |
| Standard | MIL-STD 461 D / E / F CS116 | ||
| Output current | 10 A on 100 ohm (depends on the frequency) | ||
| Output impedance | < 100 ohm | ||
| Damping factor | 15 +/- 5 | ||
| Repetition rates | single, 0.5 Hz, 1 Hz | ||
| Power rating | 210 - 250 Vac / 50 - 60 Hz / 35 W / 75 VA | ||
| Generator weight | 21 - 23 kg | ||
| Dimensions | 53 x 53 x 45 cm (L x W x H) | ||
Follow Us | Company |
|