Pulsed Current Injection (PCI) MIL-STD-188-125
Pulsed Current Injection
(PCI) MIL-STD-188-125
一、System Picture
二、System Specification
Fixed and mobile ground-based mission critical C4I systems (command, control, communications, computer, and intelligence) require full functionality and network interoperability during and after exposure to HEMP environments. Hardening requirements include stringent shielding, electrical POE (Point Of Entry) protection and special protective measures.
Montena has developed a test system to perform Pulsed Current Injection (PCI) tests according to MIL-STD-188-125. All electrical and antenna line POE protective devices must be tested in accordance to the transient suppression / attenuation performance defined in this standard. Montena systems provide a comprehensive range of verification tests for short and intermediate pulses, as well as antenna line POE.
三、System Use / Features
● Unique fully compliant test solution to cover the entire standard requirements
● Transportable for on-site verification tests
● Control and pulse management software package to simplify the test procedure
四、System Parameters
| EQUIPMENT | REFERENCE | SPECIFICATIONS | ||
| Pulse injection | Generator + control unit | EMP80K-5-500 | 1 kA, short pulse | |
| EMP300K-5-500 | 5 kA, short pulse | |||
| IPP3K-4MS | 260 A, intermediate pulse | |||
| CLP40K | 40 kV, charge line | |||
| Injection probe | IC3B | For short pulse only | Inductive coupler for common mode pulse injection | |
| CCL3 | 230 V, 60 A, 2 power lines coupler | |||
| CCS3 | 230 V, 60 A, 4 data lines coupler | |||
| Test accessories | Isolation device | DL3 | 230 V, 60 A, 2 power lines decoupling box | |
| DS3 | 230 V, 10 A, 4 signal lines decoupling box | |||
| Dummy load | TLB4 | Resistor box with 0.2, 0.5, 2 and 50 W | ||
| Measurement equipment | Current / voltage sensor | Set of current and voltage probes for injected and residual current measurement | ||
| Data transmission | MOL3000 + FCLB50 | Analog optical link with 50 m single mode fibre | ||
| Oscilloscope | OD4C1G | 1 GHz bandwidth, 10 Gs/s, 4 channels | ||
| Software | Integrated measurement and control automation software | |||
Follow Us | Company |
|