Ultra Wide Band(UWB) Testsetup
一、System Picture
二、System Specification
UWB refers to a high power electromagnetic (HPEM) threat for electronic and computer systems. Standardisation bodies such as IEC Study Group 77c are working on threat classification and test procedure definitions.
The test setup consists of a fast pulse generator connected to a HIRA (Half Impulse Radiating Antenna). The HIRA has the ability to radiate a narrow beam of pulsed electromagnetic energy over a large bandwidth. This antenna can also be used for continuous wave signals. Electronic equipment immunity assessment is the main application of this test setup.
三、System Use / Features
● Transportable test system for onsite testing possibilities
● Parabolic antenna with adjustable horizontal and vertical tilt
● Measurement sensors adapted to the test system
四、System Parameters
EQUIPMENT | REFERENCE | SPECIFICATIONS | |
Pulse generation | High speed pulse generator | GP20-01-2, GP30-01-2, GP70-01-2 | 130 ps rise time with 600 ps duration, up to 70 kV |
Half Impulse Radiating antenna | HIRA180, HIRA180S | Frequency range from 100 MHz to 18 GHz | |
Test accessories | High voltage RF load | HVLD50K | 50 Wload |
High voltage cables | HVK50-xx | Coaxial cable xx cm, up to 50 kV | |
Measurement equipment | Free field sensors + access. | SFE3-5G, SFE10G or SFM8-5G | D- and B-dot sensors 3.5 GHz, 10 GHz and 8.5GHz with balun and cables |
Derivative voltage sensor | VDOT8GS | Derivative voltage divider for pulse measurement | |
Data transmission | MOL3000 & FCLB50 | Analog optical link with 50 m single mode fiber | |
Sampling oscilloscope | OSD20G | 20 GHz bandwidth acquisition module | |
Shielded box | SB3G | Enclosure to protect the oscilloscope from EM pulse | |
Trigger generator | TG-1K | Single pulse up to 1000 pps to synchronize the pulse generator and the oscilloscope trigger. | |
Software | Remote control of test equipment and measurement management |